Io Hvac Controls LD-2610-BM Rectangular Zone Damper

Product Description

The IO HVAC CONTROLS LD-2610-BM is a 26 x 10 inch rectangular 2-position zone damper designed for use in forced-air HVAC zoning systems. Equipped with a 3-wire actuator and an LED indicator, it provides reliable on/off airflow control within a duct network. The bottom-mount configuration positions the actuator at the base of the damper for installations where overhead clearance is limited or where bottom access is preferred. Licensed HVAC technicians install this damper as part of a multi-zone control system to balance airflow across conditioned spaces.

This damper is suited for residential and light commercial forced-air zoning applications where rectangular ductwork measuring 26 x 10 inches is present. It fits inline within the supply or return duct and is controlled by a compatible zone control board or panel. The LED indicator provides a visible status reference during commissioning and service calls. The bottom-mount actuator orientation makes it a practical choice when the duct run is near a floor deck or in tight mechanical spaces.

Key Features

• 26 x 10 inch rectangular duct opening for direct inline installation
• 2-position operation provides full open and full closed airflow control
• 3-wire actuator interfaces with standard zone control boards
• LED indicator allows quick visual confirmation of damper status
• Bottom-mount actuator placement accommodates restricted overhead clearance

Compatibility

Designed as an OEM-style replacement or new-installation zone damper for rectangular forced-air duct systems requiring a 26 x 10 inch 2-position damper with a 3-wire actuator.

Installation Notes

A licensed HVAC technician should install this damper in accordance with local mechanical codes and the zone control system manufacturer's wiring instructions. De-energize the zone control panel and air handler before beginning installation. Secure the damper firmly within the duct using sheet metal screws and seal joints with foil tape to prevent air bypass. Verify LED status and damper blade position after restoring power to confirm proper operation.