Io Hvac Controls CD-1610 Rectangular Zone Damper 16x10

Product Description

The IO HVAC CONTROLS CD-1610 is a rectangular zone damper designed for ducted HVAC zoning systems. It controls airflow to individual zones by opening and closing on a signal from a zone control board or thermostat. The CD-1610 ships with a Belimo 3-wire actuator, which provides both on/off and spring-return operation for reliable zone isolation. At 16 inches wide by 10 inches tall in duct opening size, this damper fits a standard 16x10 rectangular duct and is installed by licensed HVAC technicians as part of a multi-zone forced-air system.

This damper is intended for residential and light commercial forced-air zoning applications. It is specifically referenced as compatible with Carrier and Bryant zoning systems, making it a direct-fit replacement or new-installation component in those platforms. The Belimo actuator mounts to the damper body and connects to low-voltage control wiring from a zone panel. Typical installations involve trunk-and-branch or bypass-style duct systems where individual rooms or areas require independent temperature control.

Key Features

• 16x10 inch rectangular duct opening for standard residential and light commercial duct sizes
• Includes Belimo 3-wire actuator for spring-return, fail-safe operation
• Low-voltage actuator control integrates with zone control boards and thermostats
• Referenced compatibility with Carrier and Bryant zoning systems
• Spring-return design returns damper to a defined position on power loss

Compatibility

The CD-1610 is designed for use with Carrier and Bryant rectangular zone damper applications and includes a Belimo 3-wire actuator for direct integration with compatible zone control systems.

Installation Notes

Installation should be performed by a licensed HVAC technician. Shut down the air handling unit and de-energize the low-voltage control circuit before installing or replacing the damper and actuator. The damper is field-installed into the duct system and the actuator low-voltage wiring is terminated at the zone control panel per the panel manufacturer wiring diagram. Follow all applicable local mechanical codes during installation.