Ingersoll Cutting Tools 5801533 Milling Insert IN1030 Ticn

Product Description

The INGERSOLL CUTTING TOOLS 5801533 is a solid carbide milling insert designed for high-performance metal removal in demanding machining applications. Manufactured to ISO code APKT160408R and ANSI code APLH53R01 IN1030, this right-hand, parallelogram-shaped insert features a TiCN coating applied via PVD process over a coarse-grain carbide substrate. It carries manufacturer grade IN1030 and delivers a sharp cutting edge with a positive rake geometry. The insert measures 0.6360 inches in length, 0.3750 inches in width, and 0.2070 inches in thickness, with a 1/32-inch corner radius. Two cutting edges are available per insert. It is held in the cutter body by screw clamping and is a single-sided design.

This insert is suited for milling steel, stainless steel, superalloys, and titanium in both roughing and finishing operations where edge sharpness and coating toughness are critical. It is commonly used in face milling, shoulder milling, and high-feed applications on CNC machining centers. The positive rake geometry reduces cutting forces, making it well suited for lighter cuts on difficult-to-machine materials. Licensed machinists and CNC operators in aerospace, energy, and precision manufacturing shops are the primary users of this insert.

Key Features

• TiCN PVD coating provides wear resistance and edge integrity on abrasive workpiece materials
• Positive rake angle reduces cutting forces for improved performance on superalloys and titanium
• Sharp cutting edge style minimizes built-up edge on stainless steel and high-temperature alloys
• Coarse-grain carbide substrate supports toughness in interrupted cuts
• Right-hand orientation with screw-lock insert holding for secure, repeatable clamping
• Compatible with multiple Ingersoll cutter body series for broad tooling system flexibility

Compatibility

Compatible with Ingersoll cutter series 12J1B, 12N1B, 12S1B, 12T1B, 22J3B, 22J5B, 23J6G, and 2J1B as stated by the manufacturer. Conforms to ANSI and ISO insert standards.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Always power down and lock out the machine spindle before changing inserts. Use the appropriate Torx or hex key to seat the clamping screw; do not overtighten, as this can crack the carbide. Inspect the insert pocket and seating surface for chips or debris before installing a new insert to ensure proper seating and runout.