Ingersoll Cutting Tools 5614261 Milling Insert AOMT120408FR

Product Description

The INGERSOLL CUTTING TOOLS 5614261 is a solid carbide milling insert in the AOMT series, designed for high-performance face and shoulder milling operations. Manufactured to ANSI and ISO standards under grade IN2530, it features a PVD-applied TiAlN and TiN dual-layer coating on a coarse-grain solid carbide substrate. The insert measures 0.568 inches in length, 0.326 inches inscribed circle diameter, and 0.190 inches thick. With a positive rake geometry, sharp cutting edge style, and 1/32-inch corner radius, it is suited for productive metal removal in demanding cutting conditions. Licensed machinists and CNC tooling technicians are the primary installers.

This insert is intended for milling steel, stainless steel, superalloys, and titanium workpieces in both roughing and semi-finishing operations. The HS chip breaker promotes reliable chip control across these materials. It is a right-hand, single-sided insert with two cutting edges per insert, held in place by a screw-on clamping method. It fits cutter bodies in the 12J1X, 12S1X, 12V1X, 22J3X, 22N3X, and 2J1X series. Typical applications include CNC machining centers handling P, M, and S material grade classifications per ISO workpiece material coding.

Key Features

• Solid carbide coarse-grain substrate with PVD TiAlN and TiN dual-layer coating for heat and wear resistance
• Positive rake angle with sharp cutting edge style reduces cutting forces on difficult materials
• 1/32-inch corner radius and HS chip breaker for controlled chip evacuation in steel and superalloy cuts
• Two usable cutting edges per insert, right-hand orientation, screw-mount retention
• Meets ANSI and ISO dimensional standards under ANSI/ISO code AOMT120408FR IN2530
• Compatible with six cutter body series: 12J1X, 12S1X, 12V1X, 22J3X, 22N3X, and 2J1X

Compatibility

Compatible with INGERSOLL cutter body series 12J1X, 12S1X, 12V1X, 22J3X, 22N3X, and 2J1X. Rated for primary workpiece materials including steel, stainless steel, superalloys, and titanium per ISO material codes P, M, and S.

Installation Notes

Installation is performed by a qualified CNC machinist or tooling technician. Ensure the cutter body and spindle are fully de-energized and the machine is locked out before indexing or replacing inserts. Use the correct torx or hex key to torque the insert clamping screw to the cutter body manufacturer's specified value. Inspect the insert pocket seating surface for debris or damage before seating the new insert to prevent premature edge failure.