Ingersoll Cutting Tools 5120139 Drill Tip 14mm Carbide

Product Description

The INGERSOLL CUTTING TOOLS 5120139 is a replaceable drill tip designed for high-performance drilling in stainless steel and other demanding materials. Built from solid carbide with an IN2505 manufacturer grade, this tip features a TiAlN and TiN PVD coating applied via physical vapor deposition for extended wear resistance and heat management. The 140-degree drill point angle and helical flute geometry promote efficient chip evacuation. With coolant-through capability and a 14.00mm cutting diameter, this tip suits production drilling environments where tool life and hole quality are critical. It is installed by machinists and tool-room professionals working with CNC drilling platforms.

The 5120139 is rated for M15 and M35 material grades, making it well suited for stainless steel and similar ISO M-category workpieces. It belongs to the TMA series and carries an ISO designation of TMA1380R01 IN2505. The tip uses a clamp-style insert holding method and fits an insert seat size of 13.5. With a flute length of 5.00mm, an overall projection of 7.59mm, and two helical flutes, it is configured for spot drilling, through drilling, and coolant-through drilling operations in tight-tolerance applications.

Key Features

• Solid carbide construction rated for ISO M-category stainless steel and tough alloy workpieces
• TiAlN and TiN PVD coating for thermal resistance and extended cutting edge life
• 140-degree included drill point angle supports self-centering entry and reduced thrust force
• Coolant-through design delivers cutting fluid directly to the cutting zone for heat and chip control
• Two-flute helical geometry with regular spiral promotes consistent chip flow in deep-hole applications
• Clamp-style insert holding method allows repeatable tip indexing without full tool replacement

Compatibility

Designed as a replaceable tip for TMA-series drill bodies accepting an insert seat size of 13.5, conforming to ANSI standards and the ISO designation TMA1380R01 IN2505.

Installation Notes

Installation of replaceable drill tips should be performed by qualified machinists with the spindle fully de-energized and the machine locked out per established lockout/tagout procedures. Seat surfaces on the drill body should be clean and free of chips or debris before seating the tip. Use the manufacturer-specified clamping tool to engage the clamp mechanism - do not substitute improvised tools that could damage the seat or tip geometry. Verify coolant passages are clear and coolant pressure is set appropriately for the application before resuming drilling operations.