Import MPPD050120-050BX M5x0.8 Pan Head Phillips Screw 50pk

Product Description

The IMPORT MPPD050120-050BX is a metric machine screw with a pan head and Phillips drive, sold in a box of 50. Manufactured from steel to Grade 4.8 and finished with a zinc plating for basic corrosion resistance, it follows DIN 7985 and ISO 7045 standards. The thread is M5x0.8 with a 12 mm length under head. This fastener is installed by HVAC technicians, electricians, plumbers, millwrights, and general tradespeople wherever a standard metric Phillips pan head screw is called for in equipment assembly or field repair work.

This screw is suited for light- to medium-duty mechanical assemblies in commercial and residential trade equipment. Common applications include securing sheet metal panels, electrical enclosure covers, access doors, fan assemblies, control board brackets, and similar hardware found in HVAC units, electrical panels, and plumbing equipment. The pan head profile provides a broad bearing surface and low-profile clearance, and the Phillips drive works with standard power and manual screwdrivers.

Key Features

• M5x0.8 thread size with 12 mm length under head per DIN 7985 and ISO 7045
• Pan head profile delivers broad bearing surface with low clearance
• Phillips drive compatible with standard manual and power screwdrivers
• Grade 4.8 steel construction for general-purpose mechanical strength
• Zinc-plated finish provides baseline corrosion resistance in typical indoor environments
• Sold as a 50-piece box for bench stock, service van inventory, or equipment assembly

Compatibility

Designed as a general-purpose metric replacement fastener for trade equipment requiring M5x0.8 pan head Phillips screws conforming to DIN 7985 or ISO 7045 standards.

Installation Notes

Install using a Phillips screwdriver or a Phillips bit with a powered driver set to an appropriate torque setting for M5 fasteners in the base material. Always power down or de-energize equipment before removing or replacing fasteners on electrical enclosures or control assemblies. Do not overtighten into thin sheet metal, as stripping the base material will compromise the joint. Verify thread engagement depth is adequate for the application before final assembly.