Import BD3016 Type 1 Cutoff Wheel 3 in Aluminum Oxide 60 Grit

Product Description

The IMPORT BD3016 is a Type 1 reinforced aluminum oxide cutoff wheel designed for aggressive cutting on steel and similar ferrous materials. Measuring 3 inches in diameter and 0.035 inches thick, this thin-kerf wheel minimizes material loss and heat buildup during cut-off operations. The 3/8 inch arbor hole fits standard rotary tool and die grinder spindles. Rated to a maximum of 25,450 RPM and graded at 60 grit with a hardness code of S, it delivers consistent cutting performance in fabrication, maintenance, and metalworking applications. The specification designation A60S confirms its aluminum oxide composition, 60-grit size, and bond hardness.

This cutoff wheel is suited for use with compact right-angle grinders, die grinders, and rotary tools commonly found on HVAC, plumbing, electrical, and general metalworking job sites. Its thin profile and small diameter make it practical for tight-clearance cuts on conduit, pipe, rod, and sheet steel. Fabricators and maintenance technicians who need a consistent, small-diameter cutoff wheel for production or field use will find this wheel appropriate for repeated steel cutting tasks.

Key Features

• Type 1 (01/41) flat profile for straight cut-off operations
• Aluminum oxide abrasive with 60-grit rating for consistent steel cutting
• Reinforced construction supports operation up to 25,450 RPM
• Thin 0.035 inch kerf reduces heat and material waste
• 3/8 inch arbor hole fits standard die grinder and rotary tool spindles
• Hardness code S provides firm bond retention during aggressive cuts

Compatibility

Designed as a standard Type 1 cutoff wheel replacement for die grinders and compact right-angle grinders accepting a 3/8 inch arbor and rated for wheels up to 3 inches in diameter and 25,450 RPM.

Installation Notes

Installation and wheel changes must be performed by a qualified operator following ANSI B7.1 safe use guidelines for abrasive wheels. Always confirm the tool spindle RPM rating meets or exceeds the 25,450 RPM maximum rating of the wheel before mounting. Disconnect or power down the tool completely before mounting or removing the wheel. Do not use this wheel for grinding operations — it is designed exclusively for straight cut-off use in the Type 1 orientation.