Import 22353 Jobber Drill Bit 1/16 Inch Hss Oxide

Product Description

The IMPORT 22353 is a jobber length drill bit designed for general-purpose drilling in metal, wood, and plastics. The bit measures 1/16 inch (0.0625 inch) in diameter with a 1-7/8 inch overall length and a 7/8 inch flute length. It features a 118-degree standard point angle, which is the conventional geometry for most shop and field drilling tasks. The high speed steel construction is oxide coated to reduce friction and extend service life during moderate-duty use. Right-hand spiral flutes clear chips efficiently, and the straight cylindrical shank seats securely in standard drill chucks.

This bit is suited for light drilling applications in fabrication shops, HVAC sheet metal work, electrical rough-in, plumbing installations, and general mechanical work. The 1/16 inch diameter is commonly used for pilot holes, small fastener clearance holes, and precision layout work where a fine entry point is required. The general-purpose grade and standard geometry make this bit a practical daily-use consumable for technicians and tradespeople across multiple trades.

Key Features

• 1/16 inch (0.0625 inch) diameter with a 118-degree standard point angle for conventional drilling geometry
• High speed steel construction with oxide coating for reduced friction and improved wear resistance
• Right-hand spiral flute design for efficient chip evacuation
• Straight cylindrical shank compatible with standard 3-jaw drill chucks
• Web-thinned tapered web configuration for easier bit entry and reduced thrust required
• General-purpose grade suitable for metal, wood, and plastic substrates

Compatibility

Designed as a general-purpose jobber length drill bit compatible with standard 3-jaw drill chucks accepting a 1/16 inch straight cylindrical shank, including handheld drills, drill presses, and portable magnetic-base drills.

Installation Notes

This bit is installed by a tradesperson or technician into a standard drill chuck; ensure the chuck is fully tightened before operation. Always power down and disconnect or lock out the drill before changing bits. Use appropriate drilling speeds for the substrate material — smaller diameter bits require higher RPM to maintain proper surface feet per minute. Eye protection is required during all drilling operations.