Hunter 44005140 Mp Rotator Nozzle 360 Degree

Product Description

The HUNTER 44005140 is an MP Rotator nozzle designed for water-efficient landscape irrigation. It uses a multi-trajectory rotating stream delivery system to apply water at a slow, steady rate, allowing moisture to soak into the soil rather than pool or run off. The 360-degree fixed arc pattern provides full-circle coverage with a throw distance of 10 to 12 feet. The female nozzle connection installs onto any standard spray head body or shrub adapter, making it a straightforward retrofit for existing irrigation systems. Licensed irrigation contractors and qualified technicians typically perform this installation.

This nozzle is suited for residential and light commercial turf and landscape beds where runoff and overspray are concerns. The rotating stream design produces a low precipitation rate that supports even water distribution across the irrigated area. Because precipitation rate stays matched regardless of arc or radius, the MP1000 360-degree nozzle is a common choice when upgrading conventional spray zones to low-volume, high-uniformity output. It is compatible with standard pop-up spray head bodies and shrub adapters across the irrigation industry.

Key Features

• 360-degree fixed arc delivers full-circle coverage with no adjustments required
• Throw distance of 10 to 12 feet suits mid-size turf and planting areas
• Multi-trajectory rotating streams apply water slowly to reduce runoff and improve soil absorption
• Matched precipitation rate at any arc and radius simplifies mixed-head zone design
• Female nozzle connection threads onto standard spray bodies and shrub adapters for easy retrofit
• Plastic construction is lightweight and resistant to corrosion

Compatibility

Designed to install onto any conventional spray head body or shrub adapter with a standard female nozzle connection, converting existing spray zones to rotating-stream, low-precipitation-rate output.

Installation Notes

Shut off the irrigation system and relieve line pressure before removing the existing nozzle. Thread the MP Rotator nozzle onto the spray body by hand until snug, taking care not to cross-thread the plastic fitting. After installation, run the zone and verify pattern coverage and that no adjacent heads produce conflicting overlap. Local irrigation codes and water authority requirements may apply to system modifications.