Hunt Electronics hnc324g2-mb 4MP Mini Bullet Ip Camera

Product Description

The HUNT ELECTRONICS hnc324g2-mb is a 4-megapixel mini bullet IP camera designed for professional security installations. It delivers 2688 x 1520 resolution through a 4 mm fixed lens with a minimum illumination of 0.01 lux, making it effective in near-darkness. Built-in IR LEDs provide illumination up to 100 feet. True wide dynamic range and 3D digital noise reduction maintain image clarity across high-contrast and low-light scenes. The IP67-rated housing withstands weather exposure, and the camera accepts Power over Ethernet via 802.3af or 12-volt DC input, giving installers flexible power options on a range of job sites.

This camera is suited for residential and light commercial surveillance applications where a compact, weather-resistant form factor is required. Typical installations include exterior building perimeters, parking areas, entryways, and covered outdoor zones. The fixed 4 mm lens provides a standard wide-angle field of view appropriate for general-area monitoring. Security integrators and low-voltage technicians are the primary installers for this type of unit.

Key Features

• 4MP resolution at 2688 x 1520 for high-detail image capture
• 4 mm fixed lens with 0.01 lux minimum illumination for low-light performance
• Built-in IR LEDs with up to 100 ft range for nighttime visibility
• True wide dynamic range handles high-contrast lighting conditions
• 3D digital noise reduction for cleaner image quality in low-light environments
• IP67-rated weatherproof housing for outdoor installation
• Supports PoE 802.3af or 12-volt DC power for flexible deployment

Compatibility

Designed as an OEM-style IP camera compatible with standard NVR systems supporting ONVIF or RTSP protocols and PoE 802.3af network infrastructure.

Installation Notes

Installation should be performed by a licensed low-voltage technician or security systems integrator familiar with IP camera systems and structured cabling. Power down or disconnect the network switch port before making wiring connections. When using PoE, verify the switch or injector is rated for 802.3af and that cable runs comply with standard Cat5e or Cat6 length limits. Mount the camera housing securely to prevent vibration-induced image blur, and seal any conduit entries to maintain the IP67 rating.