Hubbell SNAP5262LAA Duplex Receptacle 15A 125V Light Almond

Product Description

The HUBBELL WIRING DEVICE-KELLEMS SNAP5262LAA is a specification-grade duplex receptacle rated for 15 amps at 125 volts AC. Built with a nylon body and a self-grounding design, it is intended for flush-mount installation in standard electrical boxes. The NEMA 5-15R configuration accepts standard two-pole, three-wire plugs. This receptacle suits commercial, institutional, and residential wiring projects where code-compliant, durable devices are required. Licensed electricians install this device as part of branch-circuit rough-in or device replacement work.

The SNAP5262LAA is suited for single-phase, 15-amp, 125-volt branch circuits in office buildings, healthcare facilities, schools, and residential construction. Its specification grade rating indicates it is built to tighter tolerances than residential-grade devices, making it appropriate for high-use environments. The light almond finish coordinates with standard light almond wallplates. The wiring module method simplifies termination during installation.

Key Features

• Specification grade construction for demanding commercial and institutional applications
• Self-grounding design eliminates the need for a separate grounding pigtail
• Nylon body provides impact resistance and electrical insulation
• NEMA 5-15R configuration accepts standard 15-amp two-pole three-wire plugs
• Flush mount type fits standard single-gang and multi-gang electrical boxes
• CSA Certified, UL Listed, UL Federal Specification, and RoHS Compliant

Compatibility

Designed as a specification-grade NEMA 5-15R duplex receptacle for flush-mount installation in standard single-gang or multi-gang electrical boxes on 15-amp, 125-volt AC single-phase branch circuits.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the branch circuit at the panel and verify absence of voltage with a meter before handling the device or terminations. The wiring module termination method should be used as designed; do not override or bypass the module. Confirm box fill calculations comply with NEC Article 314 before closing the device into the box.