Hubbell-raco 2923RT Emt Conduit Coupling 3/4 in Compression

Product Description

The HUBBELL-RACO 2923RT is a compression-style conduit coupling designed for use with electrical metallic tubing (EMT). It creates a secure, metal-to-metal connection between two sections of 3/4-inch trade size EMT conduit without requiring set screws or insulated sleeves. The non-insulated, compression-fit design provides a reliable mechanical and electrical bond suited for commercial and residential wiring installations. Electricians working in panel feeders, branch circuit runs, and conduit raceway systems will find this fitting straightforward to install and code-compliant for standard EMT applications.

This coupling is used wherever two runs of 3/4-inch EMT conduit must be joined end-to-end. Typical install scenarios include exposed conduit in commercial buildings, industrial facilities, and residential service work where EMT is the specified raceway. The compression connection type eliminates the need for a screwdriver or hex key during makeup, relying instead on a compression nut that tightens onto the conduit OD for a consistent, rattle-free joint.

Key Features

• Compression connection type - no set screws required for makeup
• Fits 3/4-inch trade size EMT conduit
• Non-insulated design for standard metal-to-metal electrical continuity
• Compact form factor suited for tight conduit runs and enclosure entries
• UNSPSC classified under electrical conduit fittings (39131706)

Compatibility

Designed as an OEM-style replacement fitting compatible with 3/4-inch trade size EMT conduit systems in standard electrical raceway installations.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 358 governing electrical metallic tubing. De-energize all circuits in the raceway before making up or breaking apart conduit connections. Slide the compression nut onto the conduit end, insert the conduit into the coupling body, and tighten the nut hand-tight followed by a quarter turn with pliers - do not over-torque the compression nut as this can deform the conduit end. Ensure conduit ends are cut square and deburred before insertion to achieve a proper seat.