Hubbell-raco 2283 Fmc Conduit Connector 3/4 Inch

Product Description

The HUBBELL-RACO 2283 is a non-insulated, screw-in flexible conduit connector designed for use with flexible metal conduit (FMC) at a 3/4 inch trade size. This fitting creates a secure mechanical connection between FMC and an electrical enclosure, junction box, or panel knockout. The screw-in connection method provides a straightforward, tool-minimal installation without requiring separate locknuts in most applications. Electricians and electrical contractors install this type of connector during rough-in and finish wiring on both new construction and retrofit projects where flexible conduit terminations are required.

This connector is suited for residential and light commercial electrical installations where 3/4 inch FMC is routed to motor terminations, HVAC equipment, appliances, or other locations requiring a flexible conduit run. The non-insulated design is appropriate for standard dry and damp indoor environments. It is a single-unit fitting, packaged individually, making it convenient for service calls and small quantity needs.

Key Features

• Screw-in connection type for fast, reliable FMC termination
• Non-insulated design for standard indoor electrical applications
• 3/4 inch trade size fits standard 3/4 inch FMC
• Flexible connector shape accommodates conduit routing angles at the termination point
• Compact profile at 1.63 inches length and 1.13 inches width for tight enclosure installations

Compatibility

Designed as an OEM-style replacement or standard fitment connector for 3/4 inch flexible metal conduit (FMC) terminations at electrical enclosures and junction boxes with standard knockout openings.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the circuit and verify zero voltage with a meter before working at any enclosure or panel. Insert the connector into the knockout opening and tighten the locknut or screw mechanism firmly by hand, then snug with pliers - do not overtighten, as this can deform the fitting body. Verify the FMC is seated fully into the connector and secured before closing the enclosure.