Hubbell Killark LL17 Ll Conduit Body 1/2 Inch Imc

Product Description

The HUBBELL KILLARK LL17 is a Form 7, LL-type conduit body designed for use with 1/2-inch trade size IMC and rigid iron conduit systems. Constructed from iron with a gray finish, this oval-shaped body provides a 4 cubic inch wire capacity and an overall length of 4-11/16 inches. It is built to meet the demands of hazardous and wet location installations where code compliance and material durability are non-negotiable. Licensed electricians and industrial maintenance technicians install this fitting as part of raceway systems requiring directional changes or wire pull points in classified environments.

This conduit body is rated for hazardous locations and wet locations, making it appropriate for industrial facilities, wastewater treatment plants, petrochemical sites, and other environments classified under NEC Article 501, 502, and 503. Its Form 7 configuration and LL body shape allow for a 90-degree horizontal directional change in a conduit run while keeping the conduit entry and exit on the same plane. It is suitable for use in Class I Division 2 areas as defined by the NEC.

Key Features

• LL body type provides a 90-degree horizontal turn with both openings on the same side of the fitting
• 4 cubic inch internal volume supports wire fill calculations per NEC requirements
• Oval shape with 4-11/16 inch overall length fits standard conduit layout configurations
• Rated for hazardous locations and wet locations per NEC Articles 501.10(b), 502.10, and 503.10
• UL Listed (File E3397) and CSA Certified (File LR11852)
• Meets Federal Specifications A-A-50563 and W-C-586D

Compatibility

Designed for use with 1/2-inch trade size IMC and rigid iron conduit systems in hazardous and wet location raceway installations per NEC Articles 501, 502, and 503.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC and applicable local codes. De-energize all circuits in the work area before opening or installing conduit bodies. Ensure the cover and gasket are properly seated and all fasteners are tightened to maintain the wet and hazardous location rating of the assembly. Verify wire fill does not exceed the 4 cubic inch capacity per NEC Table 314.16(A) guidelines for conduit bodies.