Hubbell CRF20WHI Duplex Receptacle 20A 125V 5-20R White

Product Description

The HUBBELL CRF20WHI is a commercial-grade, specification-grade duplex receptacle rated for 20 amperes at 125 volts with a 5-20R configuration. The face features a finder groove design that helps electricians orient plugs quickly during installation. Constructed with a nylon face and base, a galvanized steel strap, and brass contacts, this receptacle is built for demanding commercial environments. It accepts side wiring and is fork-terminal capable, offering flexibility for various wiring methods. The 2-pole, 3-wire grounding design meets the requirements of most commercial branch circuit applications.

This receptacle is suited for commercial and light industrial branch circuit installations where a 20-amp, 125-volt grounding outlet is required. The specification grade rating makes it appropriate for office buildings, retail spaces, schools, healthcare facilities, and similar occupancies where a higher duty cycle and longer service life are expected compared to residential-grade devices. A licensed electrician typically installs this device in standard single-gang or multi-gang outlet boxes on 20-amp dedicated or shared branch circuits.

Key Features

• Finder groove face simplifies plug insertion and outlet identification in low-light conditions
• 5-20R configuration accepts both 15-amp and 20-amp plugs
• Easy-access split circuit tab allows quick conversion to split-wired circuits without additional tools
• Fork-terminal capable side wiring accommodates multiple wiring methods
• Nylon face and base resist impact and common cleaning chemicals
• Brass contacts and galvanized steel strap provide durable, corrosion-resistant construction

Compatibility

Designed as an OEM-style specification-grade replacement or new-installation duplex receptacle for commercial 20-amp, 125-volt, 5-20R branch circuit applications in standard single-gang electrical outlet boxes.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the branch circuit at the panel and verify with a voltage tester before making any connections. Side wiring terminals accept standard branch circuit conductors; the split circuit tab must be removed with pliers if a split-wired configuration is required. Ensure the outlet box fill calculations comply with NEC Article 314 before completing the installation.