Honeywell VRN2HSSX0000 Pressure Independent Control Valve

Product Description

The Honeywell VRN Series VRN2HSSX0000 is a pressure-regulated control valve designed for hydronic systems. This valve controls flow and maintains temperature even during pressure changes. It includes an integrated pressure control cartridge for effective flow balancing.

• Differential pressure regulator included.
• Flow characteristic is equal percentage.
• Suitable for hot or chilled water with up to fifty percent glycol.

Product Highlights

This valve is essential for ensuring proper flow regulation and temperature control in heating and cooling applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2HSSX0000

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Pattern: 2-way
• Size: 3 inches
• GPM: 35 GPM
• Trim Material: Stainless Steel
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.