Honeywell VRN2H7PX6102 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2H7PX6102 is a pressure-independent control valve assembly designed for hydronic systems. It effectively maintains temperature by integrating flow and temperature control. This valve compensates for pressure fluctuations, ensuring reliable performance in various applications.

• Features NPT connections for easy installation.
• Suitable for both hot and chilled water with up to fifty percent glycol solutions.
• Equipped with a differential pressure regulator for consistent pressure management.

Product Highlights

This valve is created for use with Honeywell direct-coupled actuators, maximizing compatibility and efficiency in temporary temperature control.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2H7PX6102

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 3 in
• GPM: 80 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators