HONEYWELL VRN2F6PX9200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F6PX9200 is a pressure independent control valve used in hydronic systems to integrate flow and temperature control. This valve has a two-inch NPT connection with a flow rate of seventy-five gallons per minute. It includes an electric actuator and plated brass trim, designed for on/off control with a fail-safe closed configuration. The valve works with power ranging from one hundred to two hundred fifty VAC.

• Features a two-inch NPT connection with a flow rate of seventy-five gallons per minute.
• Designed for on/off control with a fail-safe closed configuration.
• Compatible with one hundred to two hundred fifty VAC power.

Product Highlights

The Honeywell VRN2F6PX9200 controls water or glycol solutions effectively while managing flow to maintain temperature even under varying piping pressures.

Product Information

Standard Information

• Manufacturer Part Number: VRN2F6PX9200
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Connection: NPT
• Pattern: Two-way
• Size: 2 in
• GPM: 75 GPM
• Control Signal: Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators