Honeywell VRN2F6PX7102 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN2F6PX7102 is a control valve designed for pressure regulation. It integrates flow and temperature control specific to hydronic systems. This two-way valve automatically adjusts flow rates to keep the desired temperature, even when the piping pressures fluctuate.

• Built with durable forged brass and stainless steel trim.
• Designed for water or glycol solutions up to fifty percent.
• Features a reliable NPT connection and operates with a nominal supply voltage of twenty-four VAC.

Product Highlights

The valve efficiently regulates flow rates, enhancing the performance of your hydronic systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2F6PX7102
• Type: Assembly

Technical Specifications

• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2 in
• GPM: 75 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT fittings
• Body Pressure Rating: 360 psi at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 (only at 1/2 inch or 3/4 inch)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch