Product Description
The Honeywell VRN2F3PXA200 is a pressure-independent control valve designed for hydronic systems. This valve integrates flow and temperature control by automatically adjusting flow to maintain consistent temperature while dealing with varying piping pressures. Its design includes an integrated pressure control cartridge for effective flow balancing.
- Constructed from durable forged brass.
- Compatible with water or glycol solutions up to fifty percent.
- Includes a stainless steel trim for enhanced reliability.
Product Highlights
This valve supports a two-way control pattern and offers a maximum flow rate of sixty gallons per minute.
Product Information
Standard Information
-
Brand: Honeywell
-
Manufacturer Part Number: VRN2F3PXA200
Technical Specifications
-
Type: Assembly
-
Connection: NPT
-
Trim Material: Stainless Steel
-
Pattern: 2-way
-
Size: 2 inches
-
Flow Rate: 60 GPM
-
Control Signal: Two Position
-
Valve Type: Dynamic Pressure Regulated Control Valve
-
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
-
Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
-
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
-
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
-
Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
-
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
-
Close-off Pressure: 100 psid
-
Flow Characteristics: Equal percentage with flow control insert
-
Body Material: Forged brass (ASTM B283)
-
Flow Optimizer: Laser-milled, glass-reinforced Noryl
-
Trim: Nickel-chrome plated brass, or stainless steel
-
Stem Seals: EPDM O-ring and Teflon bearings
-
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
-
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
-
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
-
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
-
Warranty: 1 year on valves, 5 years on actuators; available factory-installed actuators
