Honeywell VRN2EPPX5002 Pressure Independent Control Valve

Product Description

The Honeywell VRN Series valve, MPN VRN2EPPX5002, is a pressure-regulated control valve with an electric actuator. This valve is designed for hydronic systems, integrating flow and temperature control effectively. It features a two-way design with a pressure control cartridge for flow balancing, suitable for water and glycol solutions up to fifty percent.

• Features a 1-1/2 inch NPT connection.
• Designed for systems using up to fifty percent glycol solutions.
• Maximum flow rate of twenty gallons per minute.

Product Highlights

The Honeywell VRN2EPPX5002 is essential for maintaining effective flow rates and temperature control in various hydronic systems.

Product Information

Standard Information

• Brand: Honeywell
• Type: Assembly

Technical Specifications

• Connection: NPT
• Input Voltage: 24 VAC
• Valve Type: Dynamic Pressure Regulated Control Valve
• Pattern: Two-way
• Size: 1-1/2 inch
• Flow Rate: 20 GPM
• Control Signal: Analog, Floating
• Trim Material: Stainless Steel
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to 250°F (negative thirty degrees Celsius to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators