HONEYWELL VRN2E6PXC000 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN Series valve, MPN VRN2E6PXC000, is a pressure-regulated control valve for hydronic systems. It adjusts flow to keep temperature stable, adapting to pressure changes automatically. This valve has a built-in pressure control cartridge, which combines flow balancing and regulation. It works with hot or chilled water and glycol solutions up to fifty percent.

• Sizes from one-half to three inches with internal NPT connections
• Maintains a constant pressure drop across the valve seat
• Removable manual operating handle for control during installation or power loss

Product Highlights

The Honeywell VRN2E6PXC000 valve is essential for maintaining stable temperature control within hydronic systems, making it ideal for HVAC professionals.

Product Information

Standard Information

• Manufacturer Part Number: VRN2E6PXC000
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Type: Assembly
• Connection: NPT
• Nominal Supply Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/2 inches
• Flow Rate (GPM): 75 GPM
• Control Signal: Floating, Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one-half inch to three inches with female NPT fittings
• Maximum Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105, MN7505
• Compatible Actuators - Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-quarters inch