Honeywell VRN2E4PXD000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2E4PXD000 Pressure Independent Control Valve is designed to integrate flow and temperature control in a single assembly. This valve operates as a two-way valve to maintain the necessary flow and temperature in hydronic systems, even during pressure changes. It features an integrated pressure control cartridge that balances flow effectively and is constructed with a forged brass body featuring NPT connections.

• Size: 1-1/2 inches NPT
• Flow Rate: 65 GPM
• Operating Voltage: 24 VAC

Product Highlights

The valve supports water and glycol solutions and works efficiently with Honeywell direct-coupled actuators.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2E4PXD000

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/2 inches
• GPM: 65 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 °F (121 °C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22 °C to 250 °F (-30 °C to 121 °C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches and 1 inch up to 9 GPM
• Warranty: 1 year on valves, 5 years on actuators
• Supply Voltage: 24 VAC