Honeywell VRN2DMSA3000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2DMSA3000 is a pressure independent control valve, specifically created for regulating flow in hydronic systems. This valve integrates flow and temperature control, automatically adjusting to maintain the set temperature despite changing piping pressures. It has an integrated pressure control cartridge, facilitating flow balancing. The valve is compatible with water or glycol solutions up to fifty percent.

• NPT connection for easy installation.
• Designed for use with 24 VAC supply voltage.
• Features a two-way valve pattern for efficient flow management.

Product Highlights

This valve is ideal for hydronic systems requiring consistent temperature management and flow regulation.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2DMSA3000

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/4 inches
• GPM: 10 GPM
• Control Signal: Analog
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators *