Honeywell VRN2CMSX6100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CMSX6100 is a pressure independent control valve assembly that provides flow and temperature management in hydronic systems. This valve adjusts automatically to ensure optimal temperatures, even when there are changes in pressure. It is suitable for both water and glycol solutions at concentrations up to fifty percent.

• Size of valve: one inch NPT
• Flow capacity: ten gallons per minute
• Trim material: stainless steel for durability

Product Highlights

This valve is designed to maintain steady temperatures and improve system efficiency.

Product Information

Standard Information

• Manufacturer Part Number: VRN2CMSX6100
• Brand: Honeywell

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• Flow Rate: 10 GPM
• Control Signal: Analog, Floating
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)