The Honeywell VRN2CMPX6100 is a pressure independent control valve assembly. This valve integrates flow and temperature control, managing flow in hydronic systems to ensure stable temperatures during pressure changes. It features an integrated pressure control cartridge, which helps to balance and control flow. The valve is suitable for installation with water and glycol solutions.
Valve size: one inch NPT
Flow rate: ten gallons per minute
Compatible with modulating floating control using twenty-four VAC power
Product Highlights
The Honeywell VRN2CMPX6100 is essential for effective flow management in heating systems. Its reliable performance is suited for various applications, ensuring consistent temperature control.
Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2CMPX6100
Technical Specifications
Type
Control Valve Assembly
Valve Type
Dynamic Pressure Regulated Control Valve
Connection
NPT
Pattern
2-way
Size
one inch
GPM
ten gallons per minute
Control Signal
Analog, Floating
Body Style
Two-way ball valve with straight-through flow
Pipe Size
one-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to fifty percent
Medium Temperature Range
minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
Maximum Differential Pressure
one gpm (one-half inch valve) to ninety-five gpm (three inch valve)
Close-off Pressure
one hundred psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required
thirty-five lb-in (four Nm) up to three inches (DN80)
Trim Material
Stainless Steel
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105, MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch (DN15 ~ DN 20)