The Honeywell VRN2BKSX6202 is a pressure independent control valve with an electric actuator. This valve features a three-quarter inch NPT connection and operates as a two-way valve. It has a flow rate of eight gallons per minute. The stainless steel trim enhances durability and performance. This valve is designed for modulating floating control and operates at twenty-four VAC with a fail-safe closed position. It automatically regulates flow to maintain temperature during pressure changes.
Has a three-quarter inch NPT connection.
Made with stainless steel trim for durability.
Designed for modulating floating control with a fail-safe position.
Product Highlights
The VRN2BKSX6202 integrates temperature and flow control effectively.
Product Information
Standard Information
Brand: HONEYWELL
MPN: VRN2BKSX6202
Technical Specifications
Type
Assembly
Connection
NPT
Trim Material
Stainless Steel
Pattern
2-way
Size
three-quarter inch
Flow Rate
eight GPM
Control Signal
Analog, Floating
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
one-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum)
360 psi at two hundred fifty degrees Fahrenheit
Controlled Medium
Water or Glycol solutions up to fifty percent
Medium Temperature Range
-22 degrees Celsius to 250 degrees Fahrenheit
Maximum Differential Pressure
one GPM to ninety-five GPM
Close-off pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
ML6161, ML7161, MN6105*, MN7505*; MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch
Minimum Torque Required
thirty-five lb-in up to three inches, eighteen lb-in up to three-quarter inch