HONEYWELL VRN2BKSA3001 Pressure Regulated Control Valve Assembly

Product Description

The HONEYWELL VRN2BKSA3001 is a control valve assembly that regulates pressure in hydronic systems. This valve helps to manage both flow and temperature, ensuring consistent performance during pressure changes. It includes a pressure control cartridge for effective flow balancing. The valve is equipped with three-quarters NPT connections, making it easy to integrate with Honeywell actuators. It operates with hot or chilled water and glycol solutions with a concentration of up to fifty percent.

• Three-quarters NPT connections.
• Compatible with water and glycol solutions up to fifty percent.
• Requires a minimum torque of thirty-five lb-in (four Nm).

Product Highlights

This valve offers precise control for hydronic heating and cooling systems. Its robust design features a dynamic pressure regulation system, suitable for various water and glycol mixtures.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2BKSA3001

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Size: Three-quarters inches
• Pattern: Two-way
• GPM: Eight GPM
• Supply Voltage (Nominal): Twenty-four VAC
• Control Signal: Analog
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with flow control insert
• Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gpm (one-half inch valve) to ninety-five gpm (three-inch valve)
• Close-off pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarters inch
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches; eighteen lb-in (two Nm) up to three-quarters inch
• Warranty: One year on valves, five years on actuators
• Trim Material: Stainless Steel