The Honeywell VRN Series pressure-regulated control valve, MPN VRN2BFPXC002, integrates flow and temperature control into one assembly. This valve effectively manages flow in hydronic systems, ensuring temperature stability during pressure changes. It comes with a built-in pressure control cartridge for efficient flow balancing.
NPT connection for easy installation.
Compatible with pipe sizes from half inch to three inches with female NPT fittings.
Operates on a nominal supply voltage of twenty-four VAC.
Product Highlights
This control valve is designed for water or glycol solutions, making it suitable for various applications.
Product Information
Standard Information
Brand: Honeywell
MPN: VRN2BFPXC002
WARNING:
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Technical Specifications
Type
Assembly
Connection
NPT
Input Voltage
24 VAC
Trim Material
Stainless Steel
Pattern
2-way
Size
Three-quarters inch
Flow Rate (GPM)
4 GPM
Control Signal
Floating, Two Position
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Maximum Body Pressure Rating
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range
-22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 GPM (half inch valve) to 95 GPM (three inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body Material
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20)
Minimum Torque Required
35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-quarters inch (and one inch up to 9 GPM)