Honeywell VRN2BDPX8100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BDPX8100 is a pressure independent control valve designed to provide effective flow and temperature management in hydronic systems. Built with a 3/4 inch NPT connection, this valve allows for 2-way flow with a maximum flow rate of 2 GPM. It operates with an electric actuator using a supply voltage of 120VAC to 240VAC.

• Features a 3/4 inch NPT connection.
• Designed for 2-way flow control with a 2 GPM flow rate.
• Operates on a voltage range of 100-250 VAC.

Product Highlights

This valve integrates flow control and temperature control functions, ensuring efficient performance even when piping pressures fluctuate.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2BDPX8100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 3/4 in
• GPM: 2 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, MS8105; only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)