Honeywell VRN2AESX6202 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2AESX6202 is a pressure independent control valve assembly that features an electric actuator. This assembly is built for effective flow and temperature control in hydronic systems. The valve enables flow balancing with its pressure control cartridge. It employs a two-way ball valve design that allows for straight-through flow and features a full port with a patented flow control insert.

• Connection size is one-half inch NPT.
• Compatible with water or glycol solutions up to fifty percent.
• Maximum differential pressure rated from one GPM to ninety-five GPM.

Product Highlights

The valve is used in various applications where precise flow control is necessary. Its robust construction allows for optimum performance in hydronic systems, making it ideal for HVAC professionals.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2AESX6202

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: One-half inch
• GPM: 3 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (one-half inch valve) to 95 gpm (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators