Honeywell NPF26-0118N-8 Cut Resistant Gloves A6 Medium

Product Description

The HONEYWELL NPF26-0118N-8 is an 18-gauge, polyurethane-coated work glove rated ANSI/ISEA A6 cut resistance, ANSI/ISEA Level 3 puncture resistance, and ANSI/ISEA Level 3 abrasion resistance. Built on a seamless HPPE, polyester, carbon, elastane, and tungsten liner, the palm-and-fingertip polyurethane coating delivers firm grip without sacrificing dexterity. The glove meets EN 388 rating 3X42F and carries FDA 21 CFR 177.2600 approval for food-contact use. Antistatic construction and touchscreen-capable fingertips make it practical across a range of trade environments where hand protection and task precision are both required.

The NPF26-0118N-8 is sized Medium and sold as a pair. It is suited for assembly, light mechanical work, material handling, and any task where sharp edges, puncture hazards, or abrasive surfaces are present. The glass fibre-free and silicone-free construction is relevant in environments where contamination of sensitive components is a concern. Certified for food handling under FDA and EU food contact regulations, it also fits food-processing and pharmaceutical maintenance applications. The glove is rated washable for up to three washing cycles and carries OEKO-TEX 100 certification.

Key Features

• ANSI/ISEA A6 cut resistance with EN 388 rating 3X42F
• ANSI/ISEA Level 3 puncture and abrasion resistance
• 18-gauge seamless HPPE, carbon, elastane, and tungsten liner for lightweight protection
• Polyurethane palm and fingertip coating for high-grip, dexterous performance
• Antistatic and touchscreen-capable fingertips
• FDA 21 CFR 177.2600 and EU food contact regulation certified; glass fibre free and silicone free
• Washable up to 3 cycles; OEKO-TEX 100 certified; low DMF content below 100 ppm

Compatibility

Part of the Perfect Fit 3.0 NPF26-0118N series. Sold as a single pair in Medium (numeric size 8). Suitable as a direct replacement or supplemental stock for any application requiring ANSI/ISEA A6 cut-rated hand protection in a coated knit glove format.

Installation Notes

Inspect gloves before each use for coating separation, tears, or liner damage that would compromise cut or puncture protection. Follow the manufacturer wash instructions and retire gloves after three washing cycles or upon visible degradation of the coating or liner. Replace immediately if the glove sustains a cut or puncture event, as protective integrity may be compromised after contact with a sharp hazard.