Honeywell Commercial Security HC70W48R2 Ip Dome Camera

Product Description

The HONEYWELL COMMERCIAL SECURITY HC70W48R2 is an 8-megapixel IR rugged fixed dome IP camera with a motorized varifocal lens ranging from 3.6 to 11mm. Built for demanding surveillance environments, it delivers high-resolution imaging combined with infrared night vision capability. The motorized varifocal lens allows remote zoom and focus adjustment without requiring physical access to the unit, reducing service time on installations. This camera is suited for security integrators, low-voltage technicians, and licensed surveillance installers working on commercial and industrial security systems.

The HC70W48R2 is designed for commercial security deployments where durability and image clarity are both required. The rugged dome housing makes it appropriate for locations subject to physical impact, dust, or harsh indoor conditions. The motorized varifocal lens covering 3.6 to 11mm provides flexible field-of-view adjustment, making it practical for corridors, lobbies, perimeter entry points, and wide-area monitoring zones. It fits into IP-based video surveillance networks and is typically managed through a compatible NVR or VMS platform.

Key Features

• 8MP image sensor for high-resolution video capture
• Motorized varifocal lens with 3.6 to 11mm zoom range for remote focus and zoom adjustment
• Infrared illumination for low-light and nighttime image capture
• Rugged fixed dome form factor suitable for demanding commercial environments
• IP network interface compatible with standard NVR and VMS platforms

Compatibility

Designed as an OEM-style IP dome camera for commercial IP video surveillance systems utilizing standard ONVIF-compatible NVR or video management software platforms.

Installation Notes

Installation should be performed by a licensed low-voltage or security systems technician in accordance with applicable local codes and NEC Article 725 requirements for low-voltage wiring. Power down the network switch port or PoE injector before making cable terminations. Verify cable run length and PoE power budget at the switch before mounting the camera head. Do not overtighten the dome housing during reassembly as this may affect the IR window seal.