Homewerks 512-14-112-112B Pvc Slip Union 1-1/2 in Sch 80

Product Description

The HOMEWERKS WORLDWIDE LLC 512-14-112-112B is a 1-1/2 inch gray PVC solvent weld slip union designed for use in pressurized piping systems. Built to heavy-duty Schedule 80 specifications, this union features rubber O-rings that provide a reliable, leak-resistant seal. It is rated at 150 psi at 73 degrees F, making it suitable for demanding water service applications. Licensed plumbers and pipefitters install this union where a disconnect point is needed in PVC piping without cutting the pipe. The solvent weld slip connection ensures a permanent, strong bond consistent with standard PVC joining practice.

This slip union is suited for residential and light commercial plumbing systems where PVC pipe is used for water supply, irrigation, or drainage applications. Its Schedule 80 construction offers greater wall thickness and pressure tolerance than Schedule 40 fittings. The 512-14-112-112B is compatible with both Schedule 40 and Schedule 80 PVC pipe, giving installers flexibility across mixed-schedule piping runs. Typical installations include pump discharge lines, water treatment systems, and poolside or irrigation equipment connections where periodic disassembly may be required.

Key Features

• Heavy-duty Schedule 80 PVC construction for higher pressure tolerance
• Rubber O-rings provide a leak-resistant seal at the union joint
• Rated at 150 psi at 73 degrees F for pressurized service
• Solvent weld slip connections on both ends for permanent, code-compliant joints
• Compatible with both Schedule 40 and Schedule 80 PVC pipe
• Complies with ASTM D2466

Compatibility

Designed for use with 1-1/2 inch Schedule 40 or Schedule 80 PVC pipe in solvent weld piping systems. Compatible with standard PVC solvent cement and primer per manufacturer and code requirements.

Installation Notes

Installation is performed by a licensed plumber following applicable IPC and local plumbing code requirements. Shut off the water supply and depressurize the line before cutting into any existing piping. Clean and deburr pipe ends, apply PVC primer and solvent cement per manufacturer instructions, and allow full cure time before pressurizing the system. Do not use this fitting with CPVC, ABS, or threaded connections without appropriate transition fittings.

Technical Specifications

• Pipe Size: 1-1/2 inches
• Material: PVC
• Color: Gray
• Schedule: Schedule 80
• Pressure Rating: 150 psi at 73 degrees F
• Connection Type: Solvent Weld Slip
• Seal Type: Rubber O-Ring
• Standard: ASTM D2466
• Package Quantity: 5 each
• Weight: 3.42 pounds

Standard Information

• Brand: HOMEWERKS WORLDWIDE LLC
• Manufacturer Part Number: 512-14-112-112B