Holdrite 114-C Copper Steel Carrier Bracket Flush Valve

Product Description

The HOLDRITE 114-C is a copper-bonded steel carrier bracket designed to securely mount upright to a carrier unit in commercial plumbing installations. The bracket features a single 1-1/8 inch extruded hole at the top end, sized for soldering 1 inch copper pipe. It supports the water supply pipe for a flush valve above the finished floor. Licensed plumbers install this bracket as part of in-wall carrier systems for wall-hung fixtures, providing a rigid, corrosion-resistant connection point between the rough-in piping and the flush valve assembly.

The 114-C is used in commercial restroom installations where wall-hung water closets or urinals are mounted to in-wall carrier frames. The bracket positions the flush valve at the correct service height by adjusting 4.5 inches from the carrier center and 14 inches above the top fixture mounting bolt. This placement typically results in the flush valve sitting 11.5 inches above the fixture. The copper bonding makes it compatible with copper supply piping without galvanic corrosion concerns.

Key Features

• Copper-bonded steel construction resists corrosion when used with copper pipe systems
• 1-1/8 inch extruded hole at top end sized for soldering 1 inch copper pipe
• Two slots for secure upright mounting to the carrier unit
• Positions flush valve 4.5 inches from carrier center and 14 inches above top fixture mounting bolt
• Designed to place flush valve at 11.5 inches above the fixture after proper adjustment

Compatibility

Designed for use with in-wall carrier systems in commercial plumbing applications requiring 1 inch copper pipe flush valve supply connections.

Installation Notes

Installation is performed by a licensed plumber. Shut off the water supply and depressurize the line before beginning work. When soldering, apply heat to the pipe rather than to the bracket to avoid damaging the copper bonding or bracket integrity. Verify flush valve positioning per manufacturer dimensions before final solder connection.

Technical Specifications

• Material: Copper-bonded steel
• Pipe Size: 1 inch copper
• Extruded Hole Diameter: 1-1/8 inches
• Bracket Length: 22.25 inches
• Flush Valve Offset from Carrier Center: 4.5 inches
• Flush Valve Height Above Top Fixture Mounting Bolt: 14 inches
• Flush Valve Height Above Fixture: 11.5 inches

Standard Information

• Brand: HOLDRITE
• Manufacturer Part Number: 114-C