Hertel E599924418 Ball End Mill 0.1875 in 4 Flute Carbide

Product Description

The HERTEL E599924418 is a solid carbide ball end mill designed for precision milling operations in metal cutting and machining applications. With a 0.1875-inch (3/16-inch) diameter and a 0.5-inch length of cut, this tool is built for contouring, slotting, and profiling work where tight tolerances are required. The double-end configuration provides two usable cutting ends, extending tool life on the shop floor. Four spiral flutes with a right-hand cutting and right-hand flute direction deliver efficient chip evacuation and a consistent finish. The bright, uncoated carbide construction suits general-purpose ferrous and non-ferrous machining without added coating cost.

This end mill is suited for use in CNC machining centers and manual mills handling contour milling, die work, and 3D surface finishing. The 0.1875-inch diameter makes it well matched to fine-detail passes, cavity work, and finishing cuts in molds or fixtures. A 3/16-inch shank diameter and 2-inch overall length allow direct clamping in standard collet chucks and end mill holders without an adapter. Machinists, tool-and-die makers, and CNC operators working in job shops or production environments are the primary users of this tool.

Key Features

• Double-end design provides two cutting ends per tool, maximizing value per unit
• Four spiral flutes with right-hand cut and right-hand helix for efficient chip removal
• Solid carbide construction delivers rigidity and wear resistance in demanding cuts
• Bright, uncoated finish suits general-purpose ferrous and non-ferrous materials
• 0.1875-inch ball nose profile for contouring, 3D surfacing, and radius work
• Matched shank and mill diameter (3/16 inch) for straightforward collet setup

Compatibility

Designed as an OEM-style replacement or direct-use solid carbide ball end mill for standard 3/16-inch collet chucks and end mill holders used in CNC and manual milling machines.

Installation Notes

Installation is performed by qualified machinists or CNC operators. Ensure the spindle is fully powered down and the machine is in a safe, locked-out state before changing tooling. Seat the shank fully into a clean, undamaged collet or end mill holder and torque the retention nut to the toolholder manufacturer's specification. Inspect the cutting edges for chips or damage before each use, as solid carbide tools are brittle and should not be used if the edge is compromised.