Hertel E5062024 Ball End Mill 0.375 in 4 Flute Carbide

Product Description

The HERTEL E5062024 is a solid carbide ball end mill designed for precision milling operations in metalworking and machining applications. With a 0.375-inch mill diameter and a 1.75-inch length of cut, this 4-flute tool delivers a balance of material removal rate and surface finish quality. The 30-degree helix angle promotes smooth chip evacuation and reduces cutting forces during profiling, slotting, and contouring passes. The uncoated carbide construction suits a range of ferrous and non-ferrous workpiece materials. Machinists and CNC operators working in job shops, production environments, or toolroom settings will find this end mill appropriate for standard milling setups.

This ball end mill is suited for 3D contouring, ramp milling, and finishing passes on molds, dies, and complex part profiles. The single-end configuration and right-hand cutting and flute direction are compatible with conventional CNC machining centers and manual knee mills using right-hand spindle rotation. The 0.375-inch shank diameter fits standard collet chucks, end mill holders, and shrink-fit tooling systems commonly found in machine shops. The 4.0-inch overall length provides adequate reach for most standard workpiece setups without excessive overhang.

Key Features

• 0.375-inch ball nose diameter for accurate radius profiling and 3D contouring
• 1.75-inch length of cut supports deeper cavity and slot milling passes
• 4-flute geometry balances chip load capacity with surface finish quality
• 30-degree helix angle promotes efficient chip evacuation and reduces cutting forces
• Solid carbide construction provides rigidity and wear resistance across a range of materials
• Uncoated finish allows use across ferrous and non-ferrous materials without coating compatibility concerns

Compatibility

Designed as a direct-fit replacement or standard-stock ball end mill for CNC machining centers and manual mills accepting a 0.375-inch round shank via collet, end mill holder, or shrink-fit tooling systems with right-hand spindle rotation.

Installation Notes

Installation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before tool changes. Seat the shank to the recommended minimum insertion depth for the holder type in use to minimize runout and prevent pullout during cutting. Confirm tool stick-out and overhang are within acceptable limits for the planned depth of cut before initiating the program.