Hertel E5062008 Ball End Mill 0.125 in 4 Flute Carbide

Product Description

The HERTEL E5062008 is a solid carbide ball end mill designed for precision milling operations in ferrous and non-ferrous materials. With a 0.125 inch diameter and a 1 inch length of cut, this single-end mill is suited for contouring, profiling, and slotting work where a spherical cutting tip is required. The 4-flute geometry and 30-degree helix angle promote efficient chip evacuation while maintaining a smooth surface finish. The uncoated carbide construction delivers rigidity and wear resistance across a range of general-purpose machining applications. Machinists and tool-and-die professionals are the primary users of this tool.

This ball end mill is well suited for CNC machining centers and manual mills running light-to-moderate material removal passes. The 0.125 inch shank diameter matches the cutting diameter, making it compatible with standard collet chucks and end mill holders of the same bore size. The 3 inch overall length provides adequate reach for typical cavity and contour work without excessive overhang. Right-hand cutting and right-hand flute direction are standard for conventional milling setups.

Key Features

• 0.125 inch mill diameter with matching 0.125 inch shank for direct collet fitment
• 1 inch length of cut supports contouring and slotting at moderate depths
• 4-flute design balances chip load capacity with surface finish quality
• 30-degree helix angle promotes smooth cutting action and chip flow
• Solid carbide construction provides rigidity and thermal resistance
• Uncoated finish suitable for general-purpose machining without specialized coating requirements

Compatibility

Designed as an OEM-style single-end ball end mill for use in standard collet chucks and end mill holders accepting a 0.125 inch shank diameter.

Installation Notes

Installation is performed by a machinist or tool setup technician. Power down and lock out the spindle before changing tooling. Seat the shank fully into the collet or holder to the minimum insertion depth recommended by the holder manufacturer, and verify runout with a dial indicator before beginning a cut. Do not exceed the tool's rated speed and feed parameters for the workpiece material.