Hertel 45676475 Chucking Reamer 0.367 in Solid Carbide

Product Description

The HERTEL 45676475 is a solid carbide chucking reamer designed for precision hole finishing in machine shop and production environments. With a reamer diameter of 0.367 inches and an overall length of 3.5 inches, this tool delivers accurate, repeatable bore sizing in a wide range of materials. The straight flute geometry and right-hand cutting direction are well suited to through-hole and blind-hole applications where smooth surface finish and tight tolerances are required. Machinists and tool-room professionals reach for solid carbide reamers when hardness and dimensional stability are critical to the job.

This chucking reamer is intended for use in CNC machining centers, manual mills, and drill presses where a straight cylindrical shank is compatible with standard collet or chuck toolholding. The 1.25-inch flute length provides adequate chip clearance for typical hole depths encountered in general machining work. The bright, uncoated finish makes it appropriate for use with cutting fluids across cast iron, non-ferrous metals, and similar workpiece materials where an applied coating is not required.

Key Features

• Solid carbide construction for superior rigidity and wear resistance compared to HSS reamers
• 0.367-inch reamer diameter for precise hole finishing in the 0.3500-0.3999 inch range
• Straight cylindrical shank compatible with standard collets and drill chucks
• 6-flute straight design promotes consistent surface finish and accurate sizing
• Right-hand cutting direction for conventional machine spindle operation
• Bright, uncoated finish suitable for use with cutting fluids on a range of materials

Compatibility

Designed as a standard chucking reamer for use in machining applications requiring a straight cylindrical shank and a finished hole diameter of 0.367 inches.

Installation Notes

This reamer should be installed by a qualified machinist into a properly sized collet or drill chuck before use. Ensure the machine spindle is fully stopped and the tool is securely clamped before beginning any operation. Use an appropriate cutting fluid for the workpiece material to extend tool life and maintain surface finish quality. Do not use this reamer to remove excessive stock — pre-drill or bore the hole to within recommended allowance before reaming.