Harvey Tool RSB0620 Chucking Reamer 0.0620 in Solid Carbide

Product Description

The HARVEY TOOL RSB0620 is a solid carbide chucking reamer designed for precision hole finishing in miniature applications. Built for right-hand cutting with four straight flutes, this reamer holds a diameter tolerance of +.0000 to -.0002 inches, making it well-suited for tight-tolerance bores where a consistent, accurate finish is critical. The straight-cylindrical shank seats directly in standard drill chucks or collet holders. At 2 inches overall length with a 7/16-inch flute length, it is optimized for shallow, small-diameter holes where rigidity and concentricity matter most.

This reamer is intended for small-bore finish reaming operations across machine shops, tool rooms, and precision manufacturing environments. The miniature series designation covers the 0.0500 to 0.0999 inch diameter range, making the RSB0620 a practical choice for reaming holes in instrument components, medical hardware, small fixtures, and similar applications requiring controlled sub-0.1-inch bores. It is typically run on CNC machining centers, manual mills, or drill presses with appropriate spindle speed and cutting fluid for the workpiece material.

Key Features

• 0.0620 inch reamer diameter with a tight tolerance of +.0000 to -.0002 inches for precision bore finishing
• Solid carbide construction provides superior wear resistance and rigidity compared to HSS in hard or abrasive materials
• Four straight flutes with right-hand cutting direction for smooth, consistent stock removal
• Bright uncoated finish - no coating buildup that could affect diameter accuracy in miniature bores
• Straight-cylindrical shank compatible with standard drill chucks and ER collet systems
• 2 inch OAL with 7/16 inch flute length keeps the tool compact and rigid for shallow-hole applications

Compatibility

Designed as a miniature chucking reamer for finish reaming 0.0620 inch diameter holes; fits standard straight-bore drill chucks and ER collet holders that accommodate the corresponding shank diameter.

Installation Notes

Chucking reamers should be installed by a machinist or tooling technician using a properly sized collet or drill chuck to ensure runout is minimized. Power down the spindle completely and lock the machine before changing tooling. Always apply cutting fluid appropriate to the workpiece material and run at recommended surface footage for carbide reamers - excessive feed rate or insufficient lubrication will damage the cutting edges. Do not use this reamer to remove excess stock; pre-drill or bore holes to within approximately 0.001 to 0.002 inches of final diameter before reaming.