Harvey Tool 953062-C3 Corner Radius End Mill 0.062 in

Product Description

The HARVEY TOOL 953062-C3 is a miniature solid carbide corner radius end mill designed for precision milling in tight-tolerance applications. It runs a 0.062 inch mill diameter with a 0.2 mm (0.008 inch) corner radius and a 0.186 inch length of cut, making it well-suited for fine detail work and contouring. The 4-flute, single-end geometry with a 30-degree helix angle and AlTiN PVD coating supports both roughing and finishing passes. This tool is installed by machinists and CNC toolroom technicians working with ferrous and non-ferrous workpiece materials.

This end mill fits standard stub and regular-length tooling applications on CNC machining centers and manual mills using a 1/8 inch straight cylindrical shank. It is designed for use across a range of primary workpiece materials including steel, stainless steel, cast iron, non-ferrous metals, and composites. The AlTiN coating improves heat resistance and tool life when cutting harder ferrous materials. With a 1.5 inch overall length and right-hand cut and flute direction, it seats in standard toolholders sized for 1/8 inch shank diameters.

Key Features

• 0.062 inch mill diameter with 0.2 mm corner radius for fine-detail contouring
• AlTiN PVD coating for improved wear and heat resistance on steel and stainless steel
• 4-flute single-end design supports both roughing and finishing in one tool
• 30-degree helix angle with right-hand spiral fluting for efficient chip evacuation
• Centercutting geometry allows plunge entry
• Solid carbide construction for rigidity and dimensional stability in miniature applications

Compatibility

Designed for use with standard toolholders accepting a 1/8 inch straight cylindrical shank. Suitable for steel, stainless steel, cast iron, non-ferrous metals, and composite workpiece materials. Part of the Harvey Tool Miniature End Mills Corner Radius Stub and Standard series.

Installation Notes

Installation is performed by a qualified machinist or CNC technician. Ensure the machine spindle is fully stopped and the toolholder is clean and free of debris before seating the shank. Verify runout with a dial indicator after clamping, as miniature-diameter tools are sensitive to even minor misalignment. Do not exceed the rated depth of cut for the 0.186 inch length of cut to avoid tool deflection or breakage.