Harvey Tool 30130 Engraving Cutter 90 Deg 1/4 in Solid Carbide

Product Description

The HARVEY TOOL 30130 is a solid carbide engraving cutter designed for precision engraving and marking operations on ferrous and non-ferrous metals. Built with a 90-degree included angle and a pointed tip geometry, this single-flute cutter produces clean, consistent V-groove lines and sharp character engraving. The 1/4 inch cutter diameter pairs with a 1/4 inch shank for straightforward collet or chuck mounting. With a 1/8 inch length of cut and a 2-1/2 inch overall length, this tool is suited for CNC engraving applications where dimensional accuracy and tool rigidity are critical. The bright uncoated carbide finish is appropriate for a wide range of metal substrates.

This engraving cutter is used in CNC machining centers and engraving machines for metal part marking, serial number engraving, logo engraving, and decorative line work on ferrous and non-ferrous metal workpieces. The right-hand cutting direction is standard for conventional CNC spindle operation. Typical applications include job shop work, aerospace part marking, and industrial identification engraving on steel, aluminum, brass, and similar metal materials. Machinists and CNC operators in production and tool room environments are the primary installers and users of this tooling.

Key Features

• 90-degree included angle with pointed tip for sharp V-groove engraving
• Solid carbide construction for rigidity and wear resistance in metal cutting
• Single flute design for clean chip evacuation in shallow engraving cuts
• Bright uncoated finish suitable for ferrous and non-ferrous metal applications
• Right-hand cutting direction for standard CNC spindle setups
• 1/4 inch shank diameter for compatibility with standard collet toolholding systems

Compatibility

Designed for use on ferrous and non-ferrous metals. Fits standard 1/4 inch collet and toolholding systems on CNC engraving machines and machining centers.

Installation Notes

Installation and operation should be performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully powered down and locked out before installing or removing the cutter. Seat the 1/4 inch shank fully in the collet or toolholder and torque the drawbar or collet nut per the toolholder manufacturer specifications. Verify runout with a dial indicator before beginning production cuts to protect tool life and engraving quality.