Harvey Tool 19272-C3 Double Angle Milling Cutter 90 Degree

Product Description

The HARVEY TOOL 19272-C3 is a solid carbide double angle milling cutter designed for precise symmetrical groove, chamfer, and dovetail-style milling operations. Built with a 90-degree included angle and a 0.126-inch cutting width, it removes material cleanly in a single pass where angular profile accuracy is critical. The AlTiN coating improves wear resistance and heat tolerance during high-speed dry or semi-dry cutting in ferrous and hardened materials. Six cutting teeth provide a balance of chip clearance and surface finish quality. At 2.5 inches overall length with a 5/16-inch shank, it fits standard collet and end mill holders used on CNC machining centers and manual mills alike.

This cutter is suited for machinists and tool-and-die professionals working in job shops, production environments, and precision manufacturing. Typical applications include milling symmetrical V-grooves, angular seats, and chamfers in steel, stainless, cast iron, and similar ferrous workpiece materials. The reduced 3/16-inch neck diameter provides clearance when reaching into slots or stepped features, and the 3/8-inch neck length positions the cutting edges at a controlled depth below the shank. It is well-matched to CNC vertical machining centers and manual knee mills where rigid fixturing and controlled feed rates are maintained.

Key Features

• 90-degree included angle for symmetrical V-groove and chamfer profiles
• Solid carbide construction for rigidity and dimensional stability under load
• AlTiN coating for extended tool life in ferrous and hardened materials
• Six teeth for consistent chip load distribution and improved finish
• 3/16-inch neck diameter with 3/8-inch neck length for reach into recessed features
• 5/16-inch shank diameter compatible with standard collet systems

Compatibility

Designed for use in standard 5/16-inch collet holders and end mill holders on CNC machining centers and manual milling machines. Consult tool holder specifications to confirm runout tolerances before installation.

Installation Notes

Installation should be performed by a qualified machinist following shop safety protocols. Power down and lock out the spindle before loading or removing the cutter from the holder. Seat the shank fully into the collet or holder to the recommended engagement depth and torque the retention system per the holder manufacturer specifications. Verify runout at the cutting diameter before beginning the first cut, and use climb milling with caution on manual machines to prevent backlash-related chatter or tool pull-out.