Harvey Tool 19205 Double Angle Milling Cutter 90 Deg

Product Description

The HARVEY TOOL 19205 is a solid carbide double angle milling cutter designed for precision groove, chamfer, and dovetail milling operations on CNC machining centers and manual mills. It features a 90-degree included angle with a 3/8 inch cut diameter and a 1/8 inch cut width. The 3/8 inch shank provides rigid tool holding in standard collets and end mill holders. With 6 teeth and an uncoated carbide substrate, this cutter is suited for ferrous and non-ferrous materials where sharp edge retention and dimensional accuracy are required. Overall length is 2.5 inches, keeping the tool compact for close-tolerance work.

This cutter is used in aerospace, die and mold, and general machining shops where angular features, V-grooves, and symmetric chamfers must be cut to tight tolerances. The 1/4 inch neck diameter and 1/2 inch neck length allow clearance in deeper pockets and stepped workpieces. It is typically run by machinists and toolroom operators on CNC mills or manual knee mills. The uncoated finish makes it a suitable choice for applications where re-sharpening is preferred or where coatings would interfere with tight dimensional tolerances on aluminum or brass.

Key Features

• 90-degree included angle for symmetric V-grooves and chamfers
• Solid carbide construction for rigidity and edge retention
• 6-tooth configuration for balanced chip load at moderate feed rates
• 1/4 inch neck diameter with 1/2 inch neck length for clearance in stepped features
• Uncoated finish compatible with re-sharpening and use on non-ferrous materials
• 3/8 inch shank fits standard collets and end mill holders

Compatibility

Designed as an OEM-style replacement and standard production double angle milling cutter for use in 3/8 inch collets and end mill holders on CNC machining centers and manual milling machines.

Installation Notes

This cutter is installed by qualified machinists. Secure the shank fully in a collet or end mill holder to the recommended engagement depth before operation. Ensure the spindle is fully stopped and the machine is in a safe state before tool changes. Verify runout with a dial indicator after installation to protect edge geometry and workpiece accuracy.