Harvey Tool 19202 Double Angle Milling Cutter 90 Deg Carbide

Product Description

The HARVEY TOOL 19202 is a solid carbide double angle milling cutter designed for precision grooving, chamfering, and angular slot milling in metalworking applications. Built with a 90-degree included angle and a 0.095-inch cutting width, this cutter produces clean, symmetric angular profiles in a single pass. The 3/16-inch cutting diameter and matching 3/16-inch shank diameter keep the tool compact and rigid for work in tight setups. Four cutting teeth distribute chip load evenly, supporting consistent surface finish and tool life. The uncoated solid carbide construction provides the hardness and wear resistance needed for precision cutting on steel, aluminum, and similar materials. Machinists and toolroom professionals install this tool in CNC machining centers and manual mills.

This cutter suits applications in precision machining shops, toolrooms, and production environments where accurate angular profiles are required. The 90-degree geometry makes it a direct choice for dovetail prep cuts, chamfer milling, and V-groove work. With a 2-inch overall length and a 3/32-inch neck diameter reducing to the cutting zone, the tool reaches into recessed features while maintaining shank rigidity. The 5/16-inch neck length provides adequate clearance for common angular milling scenarios in both ferrous and non-ferrous workpieces.

Key Features

• 90-degree included angle for symmetric chamfer and angular slot profiles
• Solid carbide construction for hardness and wear resistance
• Four teeth for balanced chip load and consistent surface finish
• 0.095-inch cutting width for narrow, precise angular cuts
• 3/32-inch neck diameter with 5/16-inch neck length for reach into recessed features
• Uncoated finish suitable for dry cutting or use with standard cutting fluids

Compatibility

Designed as an OEM-style replacement and standard tooling option for CNC machining centers and manual milling machines accepting a 3/16-inch straight shank tool holder or collet.

Installation Notes

Installation is performed by qualified machinists using an appropriate collet or end mill holder sized for a 3/16-inch shank. Ensure the spindle is fully powered down and the machine is in a safe lockout state before tool changes. Verify runout with a dial indicator after seating the tool, as even minor runout will degrade angular profile accuracy at this cutter diameter. Follow the tool manufacturer and machine builder guidelines for speed and feed selection when setting up this cutter.