Harvey Tool 1913M-C3 Double Angle Milling Cutter 90 Deg

Product Description

The HARVEY TOOL 1913M-C3 is a solid carbide double angle milling cutter designed for precision groove milling, dovetail preparation, and angular slot cutting on CNC machining centers and manual mills. The cutter features a 90-degree included angle with a 0.059-inch cutting width and a 1/8-inch shank diameter, making it well-suited for small-scale, tight-tolerance work. An AlTiN coating extends tool life in dry and semi-dry cutting conditions by resisting heat and oxidation at elevated surface speeds. With 2 cutting teeth and a 1.5-inch overall length, this cutter is sized for precise, controlled passes in ferrous and non-ferrous materials. Machinists and toolroom technicians are the primary installers and operators of this tool.

This double angle cutter is intended for use in precision machining applications where a symmetrical angular profile must be cut in a single pass. Typical uses include chamfering grooves, milling V-slots, and preparing mating surfaces for dovetail joints in dies, molds, and fixture components. The 0.059-inch neck diameter and 3/16-inch neck length allow access into shallow recessed features. It is suited for both job shop and production environments where consistent angular geometry is required on small workpieces.

Key Features

• 90-degree included angle for symmetrical double-sided angular cuts in a single pass
• Solid carbide construction for rigidity and dimensional stability under cutting loads
• AlTiN coating improves heat resistance and extends tool life in dry cutting conditions
• 0.059-inch cutting width and matching neck diameter enable access to narrow and recessed features
• 2-flute geometry balances chip evacuation with surface finish in fine-pass applications
• 1/8-inch shank diameter compatible with standard collets and small-bore tool holders

Compatibility

Designed for use with standard 1/8-inch collets and tool holders on CNC machining centers, manual knee mills, and high-speed spindles configured for small-diameter end mill tooling.

Installation Notes

Installation and operation should be performed by qualified machinists familiar with CNC or manual milling equipment. Secure the 1/8-inch shank fully into a collet or tool holder to the recommended engagement depth before tightening. Verify spindle runout is within acceptable tolerance before cutting, as excessive runout will accelerate wear on a 2-flute cutter of this diameter. Follow machine manufacturer guidelines and applicable shop safety protocols when setting speeds and feeds for carbide tooling.