Hartell KL-1DG-230 Condensate Pump Plenum Rated 230V

Product Description

The HARTELL KL-1DG-230 is a plenum-rated condensate removal pump designed to lift and discharge condensate water from HVAC equipment in applications where the pump must meet plenum air-handling code requirements. Operating at 230 volts and drawing 0.55 amps, it delivers a maximum lift of 18 feet. The pump connects via wire leads, uses a barbed discharge fitting sized for 3/8-inch tubing, and accepts intake connections at 1-inch or 1 3/4-inch pipe sizes. Its polypropylene float and stainless steel body gasket are built for reliable, long-service operation. Licensed HVAC technicians and mechanical contractors are the typical installers.

This pump is suited for residential and light commercial HVAC installations where condensate must be pumped to a remote drain rather than gravity-drained. Plenum-rated construction makes it appropriate for use inside air-handling plenums or return-air spaces where low-smoke, low-toxicity materials are required by code. Typical applications include central air conditioners, heat pumps, fan coil units, and high-efficiency furnaces or air handlers that produce condensate. The 2.5-foot cord length should be factored into installation planning relative to the nearest power source.

Key Features

• Plenum-rated construction meets code requirements for installation in air-handling spaces
• 18-foot maximum lift handles installations with significant vertical rise to the drain
• Flow rate of 1 GPM at 5 feet, 0.7 GPM at 10 feet, and 0.4 GPM at 15 feet for performance planning
• Barbed 3/8-inch discharge connection for secure tubing attachment
• Accepts 1-inch or 1 3/4-inch intake pipe sizes for flexible hookup
• Stainless steel body gasket and polypropylene float for durability
• Wire lead electrical connection for hardwired or junction-box installations

Compatibility

Designed as an OEM-style condensate removal pump for plenum-rated HVAC applications requiring 230-volt single-phase power. Not rated for potable water systems.

Installation Notes

Installation should be performed by a licensed HVAC technician or mechanical contractor in accordance with local mechanical codes and the equipment manufacturer's instructions. Disconnect and lock out power to the HVAC system before connecting or servicing the pump. Confirm that the discharge tubing run and total vertical lift do not exceed the pump's rated 18-foot maximum. Plenum installations must comply with applicable fire and building codes governing materials used in return-air spaces.