Hanwha Vision Us TNO-X6072EPT1-Z 2MP Explosion-proof Ptz Camera

Product Description

The HANWHA VISION US TNO-X6072EPT1-Z is a 2-megapixel explosion-proof bullet-style IP PTZ camera designed for deployment in hazardous-location environments classified as Class 1 Division 1 (C1D1). It features a 3-9mm motorized lens and carries an IP66 ingress protection rating, making it suitable for outdoor and wet-location installations where both environmental exposure and the presence of flammable gases or vapors are concerns. This unit is intended for installation by licensed security integrators or industrial electricians familiar with hazardous-location equipment and NEC Article 500 requirements.

This camera is built for industrial and commercial facilities where ignition risk must be controlled at the equipment level, including oil and gas processing sites, chemical plants, refineries, wastewater treatment facilities, and similar environments. The C1D1 rating covers locations where ignitable concentrations of flammable gases or vapors are present under normal operating conditions. The IP66 rating confirms protection against dust ingress and high-pressure water jets, supporting reliable operation in harsh outdoor or wash-down areas.

Key Features

• 2MP image resolution for clear identification in hazardous-location surveillance
• Class 1 Division 1 (C1D1) explosion-proof rating per NEC Article 500 hazardous location standards
• IP66-rated enclosure provides full dust protection and resistance to high-pressure water jets
• 3-9mm motorized zoom lens enables remote field-of-view adjustment without entering the hazard zone
• Bullet-style housing supports fixed or pole-mount installation in industrial settings
• PTZ functionality allows pan, tilt, and zoom control for wide-area coverage from a single unit

Compatibility

Designed as an OEM-style IP PTZ camera for use in Class 1 Division 1 hazardous-location surveillance systems. Consult the manufacturer documentation for compatible video management software and network video recorder platforms.

Installation Notes

Installation must be performed by a licensed electrician or qualified security integrator with documented experience in NEC Article 500 hazardous-location wiring. All conduit seals, fittings, and enclosures used with this camera must carry appropriate hazardous-location ratings for the classified area. Power down and de-energize all circuits before mounting or making wiring connections. Do not open the camera enclosure while circuits are energized or while the classified atmosphere may be present.