Ham-let 3001220 Compression Tube Plug 1/2 in 316 Ss

Product Description

The HAM-LET 3001220 is a compression-style tube plug manufactured from 316 stainless steel for use in instrumentation, process, and industrial fluid systems. It terminates a 1/2-inch outside-diameter tube run without welding or threading, using a standard compression fitting connection. The 316 stainless steel construction and compliance with ASTM A182, ASTM A213, ASTM A269, ASTM A276, ASTM A479, DIN EN10122-5, and DIN EN10272 make it suitable for corrosive media, high-purity applications, and environments where material traceability is required. Licensed pipefitters, instrument technicians, and industrial maintenance personnel are the typical installers.

This compression tube plug is suited for residential and commercial instrumentation tubing systems where a clean, leak-tight dead-end termination is needed. It is also used in process piping panels, analyzer sample systems, and hydraulic or pneumatic bench assemblies wherever a 1/2-inch OD tube line must be capped. The part carries a Swagelok-equivalent cross-reference of SS-810-P, which can assist in retrofit and replacement situations on existing compression tubing installations.

Key Features

• 316 stainless steel construction meets ASTM A182, A213, A269, A276, and A479 material standards
• Compression end connection accepts 1/2-inch outside-diameter tubing with no welding or threading required
• DIN EN10122-5 and DIN EN10272 compliance supports international and high-purity system applications
• Rated for temperatures from -20 degrees F to 37 degrees F operational range per supplier data
• Cross-references to Swagelok part number SS-810-P for retrofit and replacement use
• Lightweight at 0.25 pounds, suitable for panel and rack-mounted instrument tubing assemblies

Compatibility

Designed as a compression-style OEM-equivalent tube plug for 1/2-inch outside-diameter tubing systems. Cross-references to Swagelok part number SS-810-P for direct replacement in compression tubing assemblies using that standard.

Installation Notes

Installation should be performed by a qualified pipefitter or instrument technician familiar with compression fitting assembly procedures. Depressurize and isolate the tubing circuit completely before removing any existing fitting or installing this plug. Follow the tubing manufacturer and fitting manufacturer guidelines for proper ferrule seating and nut torque - do not over-tighten. Local codes and applicable ASME or process piping standards should be consulted for system-level compliance.