Halder 23010.0162 T-slot Nut M14 Tapped Through

Product Description

The HALDER 23010.0162 is an M14 tapped-through T-slot nut designed for secure fastening in T-slot framing systems and machine tables. The nut features a 15.6mm slot width and a base measuring 25mm wide by 9mm tall, with an overall length of 25mm and an overall height of 18mm. It accepts an M14 threaded fastener running fully through the body, allowing a bolt or stud to engage from below and clamp from above. This style of T-slot nut is a standard component in fixturing, workholding, and industrial assembly applications installed by machinists, millwrights, and maintenance technicians.

This T-slot nut fits into standard T-slot channels with a 15.6mm slot width, common on machine tool tables, aluminum extrusion systems, and fabrication fixtures. The tapped-through design gives full thread engagement along the body height, which supports higher clamping loads than a standard blind-tapped nut. It is suited for both production fixturing and general-purpose workholding setups in industrial and manufacturing environments.

Key Features

• M14 tapped-through thread for full-depth bolt engagement
• 15.6mm slot width fits corresponding T-slot channel profiles
• Base dimensions of 25mm wide by 9mm tall for stable seating in the slot
• Overall length of 25mm and overall height of 18mm
• Tapped-through design supports higher clamping loads than blind-tapped alternatives

Compatibility

Designed for use in T-slot channels with a 15.6mm slot width, typical of machine tool tables and industrial T-slot framing systems that accept M14 fasteners.

Installation Notes

Installation is performed by machinists, millwrights, or maintenance technicians working on machine tool tables or fixturing systems. Slide the nut into the T-slot channel before inserting the mating bolt or stud, then rotate the nut 90 degrees to seat it across the slot. Ensure the machine table or fixture is de-energized and any moving components are locked out before accessing the work surface. Do not overtighten the mating fastener beyond the rated capacity of the T-slot channel or the fixture plate.